Technique Page - Multiple Imagery

How to do Multiple Imagery: 

For Multiple Imagery, you will need to shoot multiple images of the same or similar subject, for instance, flowers, or a person. This will need to be at least 9 images or more. Afterwards, Photoshop is needed. 

• Once all the images have been shot, and there are at least 9 decent images, you can create a Multiple Imagery. 
• Multiple Imageries can be in 9s, 12s, 16s etc. 
• In Photoshop, you will need to open up all the images you have selected to use, and then will need to open a new, untitled document that is either landscape or portrait depending on whether you shot vertical or horizontal images. You will then need to divide number of images by the length/height of the page, depending on how many images there is in a row/column. This will allow you to have a space in between the images. 
• After you have calculated this, you well then need to crop the images into the right size, so that all of them fit on to the page. 
• By zooming into the images at 100% you will have a clear indication of how many 'squares' (which is why you need a transparent page) there are between each image, and they all need to have the exact same space between them. 
• Once all the positioning is finished, you can then use levels and curves to adjust the colouring and brightness of the images all together, and then crop if needed around the images. 

Photoshop screenshots of the steps to create a Multiple Imagery: 

 Step 1. Select all the images you have to create a Multiple Imagery, this can be 9, 12, 16 or more images.

 Step 2. Open all the images, choosing the ones you want, and then calculate how small the images need to be in order to fit into a Multiple Imagery - for this one in particular, i have 12 images so 4 by 3, therefore the images need to be quite small.

Step 3 and 4. Crop the images to an appropriate size.   

 Step 5. Begin to open and create a new document.

 Step 6. Here I have selected the international portrait, I have then swapped the width and height measurements so that my document is landscape, and I have also made sure that the background is transparent.

 Step 7. This is the document you will need to open (or it can be portrait).

 Step 8. Drag each image you are going to use away from photoshop, so you have a clear view of all the images and the document as well.

 Step 9. Drag each individual image over to the document.

 Step 10. Here, I noticed my canvas size wasn't big enough to fit all twelve images and as i wanted 4 by 3, i now need to make the width of the document bigger.

 Step 11. Here I am changing the canvas size so that it will fit the entire Multiple Imagery.

 Step 12. Once all the images have fit into the document, I will also have to increase the canvas size again so that i can create a gap between each image.

Step 13. Here I have moved the images so that they have a gap in between each of them.

 Step 14. You will then, need to zoom in at 100% so that you can line up your images exactly, and create the gap sizes exactly the same using the squares on the background - which is why we need the background to be transparent.

 Step 15. Crop the entire image to the size you want, leaving a little room around the edges to match the gaps between the individual photos.

Step 16. Use Levels and Curves to brighten and enhance the images.

Step 17. You're done! 

This is the finished result.

Technique Page - Location Portraiture

How to do location portraiture: 

• Location portraiture is a camera shooting technique. 
• During this lesson, we were asked to take photos in pairs, of each other but also include depth within these shots.
• So for example, in the shot above I positioned my model on the right side, leaving enough room to show the depth of the building on their left. 
• You could do this with pathways, trees, streets etc. 
• Another way to shoot location portraiture is to zoom in to a model, which will change the scale of the background, or you could get your model to move forward, so that the background stays exactly the same in each shot (if you take more than one) but your model is closer in the frame. 

Technique Page - Animation

How to create the first animation: 

• Take a photo. 
• Upload it to photoshop, open up timeline, and duplicate the photo along the timeline. 
• Then add the black and white effect, to the photos in the middle, leaving coloured images at the start and end and make sure the animation is playing slowly. 
• This will make the colour of the image change from colour, to black and white, back to colour. 

How to create the second animation: 

• Do the same as the one before, but make the duration of time faster. 

How to do the third animation:

• For this, I asked a model to do a roly-poly across the grass.
• I then used the continuous setting on my camera, which was positioned on a tripod. 
• Whilst my model was doing the actual role-poly, I shot lots of images of each stage of the movement. 
• I then used the same procedure above ^, but instead of using one image, I selected all the images that I shot, and then reversed the images back again. 
• This meant that within the animation, the model would do a forward roll-poly, and go backwards as well, so the animation is continuous. 

Technique Page - Video

How to create a video within a picture: 

• First, shoot a portrait image with a frame in the shot, my example is a model holding the frame vertically. 
• I then set my camera to video, and shot a video, my example was a panoramic style from the same model's shoes up to his face. 
• I then used Premiere Pro and Photoshop to edit the video within the photo, in the space of the frame.  

Technique Page - Blur

How to do Blurring: 

• Set your camera to Manual, ISO 200 and depending on the lighting F22. The shutter speed also needs to be quick, so between 1-4 seconds. 
• Lighting needs to be harsh so that the blur can be seen clearly in the photograph. 
• Set the studio up so that the lights are shining on to the subject, with a black backdrop. 
• Make sure the subject moves quite quickly, but makes it obvious so that the blur is significant within the image. 

Technique Page - High Key Lighting

How to do a High Key Lighting shoot: 

• Firstly, the studio has to be set up so that there is a white background, 2 lights positioned behind polystyrene walls, reflecting on to the background, and 2 other lights reflecting the subject. Here is a light diagram to show how the set up should be: 

• The subject can be anything from a model, food, an object etc. 
• Depending on how bright you want the photo to be - you can increase the exposure in order to get a brighter picture. 

Technique Page - Slow Sync Flash

How to do Slow Sync Flash:

• To do Slow Sync Flash you will need to set your camera to 2.0+ (depending on how slow you want the shutter speed to be) second exposure, F16 and an ISO 200. 
• The model (you can have more than one model if you wish) will need to move constantly until the camera has eventually taken the shot. This will capture the blur of their motion within the shot. 
• The black backdrop allows the colour of the blur to be shown more clearly. 

Straight Images - Sequencing

Straight Images - Animation